logo

Technical Support

Program the Site Identification Phrase

The RFC-1/B identifies itself when it answers the telephone or places a call to alert personnel of an alarm condition. The phrase that the RFC-1/B delivers is programmable so that sites can be uniquely identified.

The Site ID Phrase can be programmed with any combination of words, letters or numbers from the word table. The factory setting is "This is RFC-1/B".

  • the Site ID Phrase may contain up to 6 words/phrases from the word table
  • each word is identified by a code consisting of two values (called V1 and V2)

Special Conditions

There are two special cases involving the final word of the site identification phrase.

  • If word 6 is programmed with 500ms pause the RFC-1 omits the "enter" prompt when it answers an incoming call.
  • If word 6 is programmed with 200ms pause the RFC-1 waits two extra seconds before it says "enter" when it answers an incoming call.

Instructions

Use the selections below to choose the words for the site ID phrase. Select "(unused)" for words that are not used.

The values and adresses will be calculated and displayed. Click the "Show Instructions" button to display step-by-step programming instructions.

Word 1

This is the first word of the site identification phrase.

select a word from the list

Word 2

This is the second word of the site identification phrase.

select a word from the list

Word 3

This is the third word of the site identification phrase.

select a word from the list

Word 4

This is the fourth word of the site identification phrase.

select a word from the list

Word 5

This is the fifth word of the site identification phrase.

select a word from the list

Word 6

This is the final word of the site identification phrase.

select a word from the list

Results

Program these addresses with the values shown below.

At memory address 0984 program value:

At memory address 0985 program value:

At memory address 0986 program value:

At memory address 0987 program value:

At memory address 0988 program value:

At memory address 0989 program value:

At memory address 0990 program value:

At memory address 0991 program value:

At memory address 0992 program value:

At memory address 0993 program value:

At memory address 0994 program value:

At memory address 0995 program value:

Programming Instructions

Programming instructions are displayed in a new window. Popup blockers may interfere with this feature.